RTOs must handle various tasks post-registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation usually presents the biggest challenge.
We have numerous articles on validation, but let's go back to the term itself. ASQA defines validation as a quality review of the assessment process.
Simply put, validation confirms which aspects of an RTO's assessment process are right and identifies where improvements are needed. A clear understanding of its main components makes it less intimidating.
As per the 2015 SRTOs Clause 1.8, RTOs are required to ensure their assessment systems, including RPL, meet training package requirements and follow the Principles of Assessment and Rules of Evidence.
The standards require RTOs to perform two types of validation.
The first assessment validation type verifies that your RTO's assessments adhere to the training package requirements within your scope.
The subsequent validation confirms that assessments are conducted according to the principles of assessment and rules of evidence.
Thus, we understand that validation is done before and after the assessment. This article highlights the first type: assessment tool validation.
The Fundamentals of the Two Types of Assessment Validation
Assessment Validation: An Explanation
As noted earlier and in our earlier blogs, validation is divided into two stages: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, often referred to as pre-assessment validation or verification, deals with ensuring all unit requirements are addressed as per the first part of the clause, ensuring complete workbook compliance.
Conversely, post-assessment validation pertains to the implementation, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.
Our focus here will be on assessment tool validation.
Steps to Perform Assessment Tool Validation
With a grasp of the two validation types, let’s focus on assessment tool validation.
When to Conduct Assessment Tool Validation
Assessment tool validation is intended to confirm that all elements, performance criteria, and performance and knowledge evidence are met by your assessment tools.
This implies that any time you get new learning resources, assessment tool validation must be done before they are used by students.
You don’t have to wait for the next scheduled validation in your 5-year cycle. Validate new resources right away to ensure they are ready for students.
However, this isn't the only time to perform this type of validation. Conduct assessment tool validation also when you:
- you update your resources
- new training products are added on scope
- review your course against training product updates
- learning resources are identified as a risk during the risk assessment
ASQA's risk-based approach to regulation necessitates regular risk assessments by RTOs. If there are student complaints about learning resources, it's an opportune time for assessment tool validation.
Training Products to Validate
Do not forget, this validation ensures compliance of all learning resources before they are used. All RTOs must validate resources for each unit.
What Do You Need for Assessment Tool Validation?
Learning Materials
For validation of your assessment tools, you will require the full set of your learning resources:
Mapping tool – this is the initial document to review. It identifies which assessment items address unit requirements, speeding up validation.
Learner/student workbook – ensure it is suitable as an assessment tool during validation. Check if instructions are clear and answer fields are sufficient. This is a common issue.
Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item exist. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – these could be checklists, registers, and templates created separately from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.
Assessment Validation Panel
Clause 1.11 outlines the requirements for validation panel members, indicating validation can be done by one or more individuals. Typically, RTOs require all trainers and assessors to attend, occasionally inviting industry experts.
As a whole, your validation panel must have:
Vocational competencies and industry skills relevant to the unit being validated
Up-to-date knowledge and skills related to vocational teaching and learning
Either of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or its updated version
Validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool assists in both the validation process and documentation. It simplifies identifying how each assessment item corresponds to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can provide proof that you have validated your resources before students use them.
Although ASQA does not recommend or require a particular template for assessment tool validation, many templates are accessible online. These tools typically have validators examine the tools in their entirety to determine if they meet the principles of assessment.
Assessment Principles Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.
We highly recommend using a more detailed template to inspect each unit requirement and its corresponding assessment items. Here is an example:
Element Performance Criteria Instructions for Assessment Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Checked?
As we explained in our blog post Common Problems In Assessment Tools, it’s vital that your assessment tools enable trainers to follow assessment principles and evidence rules.
Assessment Principles
Fairness – Does the assessment provide equal opportunity and access to all participants?
Flexibility – Are multiple options available in the assessment to demonstrate competence based on different needs and preferences?
Validity – Is the assessment assessing what it is supposed to assess? Is it a valid tool for measuring the required skill or knowledge?
Reliability – Will the assessment yield the same results every time, no matter who conducts the training? Will different assessors make the same decision on skill competence?
Evidence Key Rules
Validity – Does the evidence confirm that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence adequate to ensure the learner has the required skills and knowledge?
Authenticity – Is the assessment tool confirming that the work is the candidate’s own?
Currency – Are the assessment tools reflective of current units of competency and contemporary industry practices?
Although these are regularly covered in VET professional development and nationally recognised training, numerous tools still struggle to meet these requirements.
To avoid employing learning resources that leave unit requirements unmet, be sure to adhere to these guidelines:
Show What You Mean
Pay close attention to the verbs in the unit read more requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Carry out each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:
change diapers
prepare bottles, feed babies from bottles, and clean equipment
solid food prep and feeding babies
respond to baby signs and cues suitably
prepare infants for sleep and settle them
monitor and encourage age-appropriate physical exploration and gross motor skills
Getting students to describe changing nappies for babies under 12 months doesn’t meet the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.
Heed the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.
Total or Not Competent
Pay attention to lists. As noted earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Provide More Detail
Every assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions do not confuse students or assessors. For example:
What kind of information can be included in a work package?
What information might be included in a work package?
Answers might include:
Necessary resources
Corresponding costs
Time span of activities
Designated roles and responsibilities
If an assessment item requires multiple answers, specify how many answers are needed from a student. This ensures your assessment is reliable, and the evidence obtained is valid.
This is true for assessment items with double-barrelled questions or questions requiring more than one answer at the same time. These can confuse students and assessors, as shown in the sample question below:
Identify a hazard and/or environmental concern in the work area and select the most effective hazard control hierarchy.
Answers might include, but are not limited to:
Weather conditions – isolating the work area, engineering, personal protective equipment
Work area and ground conditions – elimination, isolation, engineering controls
People – isolating, use of engineering controls, administrative controls
Structural hazards – substitution, isolating, engineering controls
Chemical hazards – isolation, use of engineering controls, administration
Equipment or machinery – isolation, engineering controls, administrative controls
Avoiding double-barrelled questions makes it simpler for students to respond and for assessors to accurately judge competence.
Given these requirements, you might wonder, “Don’t learning resource developers provide audit guarantees?” However, these guarantees require waiting for an audit to rectify noncompliance. This impacts your compliance history, so it’s better to take a safe and compliant route.